Door Handle Replacement - UPVC Or Composite Door Handle
Door handle replacement can be a simple DIY task. You can easily find the perfect door handle for your home, regardless of whether you're looking for an UPVC door handle or a Composite one.
The lever handle, which is a popular option for modern and period homes, is a key component in both. It's the perfect blend of style and strength, offering the best in performance and weather protection.
Removing the Old Handle
If your front door handle is beginning to feel shaky or droop it is probably time to replace it. It is a fairly simple job and can be accomplished by yourself. You'll need to purchase an entirely new handle from a home improvement store and some tools you already own. It is best to remove the handle you have been using to ensure that the new handle fits perfectly.
Begin by taking your toolkit and placing an edge wedge of the door under the door's edge to stop it from closing while you're working. This will prevent the door from opening when you take off the handle and replace it.
You will then have to remove the screws that hold the handle in place. These are usually located on the side where the handle meets the door. Sometimes, they are covered by an edging or face plate to hide the fixings. After the screw is removed, the handle should come off easily. You may also need to loosen the screw on the back.
Once you have taken out the old handle and spindle, you'll be left with holes in your door which you can use to mount the new handle. You should measure the handle's length from the screw at the top to the center of the keyhole. This will help you find the right handle that fits perfectly in your door.
You'll also need to choose the type of lock to put in your door. There are a myriad of locks that you can pick from, including mortice locks and cylinder locks. There are also British Standard Locks. It is crucial to determine which type you need before beginning the process. If you're not sure, you can always ask your local locksmith for advice.
It is important to install the lock correctly, no matter which type you choose. This will ensure maximum safety and security. It is recommended to install the lock in an area that is dry and warm. This will help prevent any moisture or condensation from damaging the lock and creating potential issues later on down the line.
After you have installed your new lock, it's recommended to test it by locking and unlocking the door a few times. If everything works correctly you will now be able to enjoy the benefits of a fashionable sturdy, safe and reliable door. You'll also be in a position to save money on maintenance and repairs when you replace your composite door.
Installing the new Handle
You may want to replace the composite door handle for various reasons, including aesthetics and damage to the previous one. You might also want to replace the handle if damaged or weathered. It is possible to replace the handle without having to call in experts.
Measurements are the first step to installing a new handle. This will ensure that the handle fits perfectly in the holes already in place. It is necessary to remove the external and interior handles in order to take measurements. You'll then need to measure the distance from screw-to-screw. This will be the distance between the centre of the top fixing screw to the middle of the keyhole. This will give you an idea of the total length of the backplate of the handle. You can use this to determine the type of handle that you need.
After you have made the measurements, you are able to purchase a new handle. You can then begin installing it. Installing the new handle is the same process as removing the old one however, it's reversed. To avoid any hiccups, it's important that you carefully follow the instructions from the manufacturer. Once you're done, your handle should fit perfectly in the holes that are already there. Then, you can put the faceplates or caps on the screws to finish up.
UPVC and composite doors are the most well-known front doors in the UK. They are both well-known for their durability and effectiveness. They're very secure and visually appealing too. As time passes, they can develop a variety of problems that can cause annoyance to homeowners. For instance, doors may begin to creak after changes in the weather. Repair My Windows And Doors can be caused by the expansion and contraction of plastics used in the door.
You might also find that your composite doors are starting to appear less appealing over time You may also begin to notice a few scratches or dings. These aren't necessarily signs of wear and tear, it's important to take care of your doors and guard them from damage.
If you're looking for a uPVC or Composite door that will keep your home safe and looking good, Value Doors is here to assist. We offer a variety of doors including stylish and sturdy composite doors, that come in over 15 design options. You can also pick from an array of styles and colors to create an unique exterior appearance. If you're interested in our products, contact us today to learn more!
The Final Stage
Once you've installed your new door handles, there are some tips to ensure they're in good condition. The first is to clean them frequently. Regular cleaning using a damp cloth helps remove dust and dirt to keep them looking pristine.
Additionally, it's also a good idea to spray them with a thin coat of silicone-based lubricant every couple of months. This will ensure they operate smoothly and prevent them from becoming sticky or stuck in their place.
This is a minimal amount of maintenance that will prolong their life and increase the performance of your doors. Finally, it's important to measure accurately when purchasing new handles to avoid any issues with fitting. If you're not sure how to go about this you can consult a professional in the industry to take precise measurements for you. This will decrease the risk of getting composite doors that are too large or in error which can lead to costly repairs.
This type of project should not be undertaken by amateurs. Replacing the handle on the front of your door is a difficult task that requires experience and the right tools to succeed.
The best solution is to buy a simple-to-follow kit with simple instructions and user-friendly images. They are easily accessible and suitable for all levels of home improvement. They are also a cost-effective alternative to professional labor.
It is important to choose the appropriate material for replacing your door handle. There are many choices in the market, including aluminum and stainless steel. Each offers unique properties that make them suited to different kinds of doors. Stainless steel is durable and flexible, while aluminium has the strongest strength and corrosion resistance.
In addition to this, it's important to choose the right handle for your door's design and interior scheme. A wide range of colour and finishes are available to meet all tastes and budgets. Create a mock-up of your options using samples to check out how your new handles would look in your home prior to you purchase your final choice. This will ensure that your chosen handles are a perfect match.